How to get 12V power by PSU without PC
1st Step
Just look after the green wire in the cable tree from the PSU.
Follow it to the 20 or 24pin ATX plug.
The green cable is in a way the "receiver" you need to power up the PSU.
2nd step
Now it's time for the wire. Bend the wire and close up the little green plug from the big ATX plug to any other BLACK plug. Cause the black is the ground. To come off best you should connect the green with black besides the green.
Your PSU should power up immediately!
You are done!
<< Notes >>
Use a thicker cable for this. a standard one will cause a loose connection witch
isn't good for the PSU.
When you do this make sure that you have some device(s) connected to the PSU. Otherwise your PSU tries to drive the non-existing device an will overheat.
isn't good for the PSU.
When you do this make sure that you have some device(s) connected to the PSU. Otherwise your PSU tries to drive the non-existing device an will overheat.
Other options
Add a switch instead the wire.
simply bend 2 wires like I do in the pictures an stick them into the black and the green port of the ATX plug and the other ends into the switch.
Ready to go!
You have any other wrongs, please comment..
This is dummy text. It is not meant to be read. Accordingly, it is difficult to figure out when to end it. But then, this is dummy text. It is not meant to be read. Period.